Contemporary adhesive cementation: the challenge of bonding to new CAD/CAM restorative materials.
References
1. van Noort R. The future of dental devices is digital. Dent Mater. 2012;28(1):3–12.
2. Belli R, Wendler M, de Ligny D, Cicconi MR, Petschelt A, Peterlik H, Lohbauer U. Chairside CAD/CAM materials. Part 1: Measurement of elastic constants and microstructural characterization. Dent Mater. 2017;33(1):84–98.
3. Della-Bona A. Important aspects of bonding resin to dental ceramics. J Adhes Sci Tech. 2009;23(7-8):1163–76.
4. Matinlinna JP, Lung CYK, Tsoi JKH. Silane adhesion mechanism in dental applications and surface treatments: A review. Dent Mater. 2018;34(1):13–28.
5. Moon JE, Kim SH, Lee JB, Han JS, Yeo IS, Ha SR. Effects of airborne-particle abrasion protocol choice on the surface characteristics of monolithic zirconia materials and the shear bond strength of resin cement. Ceramics Int. 2016;42(1):1552–62.
6. Wang H, Aboushelib MN, Feilzer AJ. Strength influencing variables on CAD/CAM zirconia frameworks. Dent Mater. 2008;24(5):633–8.
7. Kawai N, Lin J, Youmaru H, Shinya A, Shinya A. Effects of three luting agents and cyclic impact loading on shear bond strengths to zirconia with tribochemical treatment. J Dent Sci. 2012;7(1):118–24.
8. Vargas MA, Bergeron C, Diaz-Arnold A. Cementing all-ceramic restorations: recommendations for success. J Am Dent Assoc. 2011;142(Suppl 2):20S–4S.
9. Peumans M, Valjakova EB, De Munck J, Mishevska CB, Van Meerbeek B. Bonding Effectiveness of Luting Composites to Different CAD/CAM Materials. J Adhes Dent. 2016;18(4):289–302.
10. Egilmez F, Ergun G, Cekic-Nagas I, Vallittu PK, Lassila LV. Light Transmission of Novel CAD/CAM Materials and Their Influence on the Degree of Conversion of a Dual-curing Resin Cement. J Adhes Dent. 2017;19(1):39–48.
2. Belli R, Wendler M, de Ligny D, Cicconi MR, Petschelt A, Peterlik H, Lohbauer U. Chairside CAD/CAM materials. Part 1: Measurement of elastic constants and microstructural characterization. Dent Mater. 2017;33(1):84–98.
3. Della-Bona A. Important aspects of bonding resin to dental ceramics. J Adhes Sci Tech. 2009;23(7-8):1163–76.
4. Matinlinna JP, Lung CYK, Tsoi JKH. Silane adhesion mechanism in dental applications and surface treatments: A review. Dent Mater. 2018;34(1):13–28.
5. Moon JE, Kim SH, Lee JB, Han JS, Yeo IS, Ha SR. Effects of airborne-particle abrasion protocol choice on the surface characteristics of monolithic zirconia materials and the shear bond strength of resin cement. Ceramics Int. 2016;42(1):1552–62.
6. Wang H, Aboushelib MN, Feilzer AJ. Strength influencing variables on CAD/CAM zirconia frameworks. Dent Mater. 2008;24(5):633–8.
7. Kawai N, Lin J, Youmaru H, Shinya A, Shinya A. Effects of three luting agents and cyclic impact loading on shear bond strengths to zirconia with tribochemical treatment. J Dent Sci. 2012;7(1):118–24.
8. Vargas MA, Bergeron C, Diaz-Arnold A. Cementing all-ceramic restorations: recommendations for success. J Am Dent Assoc. 2011;142(Suppl 2):20S–4S.
9. Peumans M, Valjakova EB, De Munck J, Mishevska CB, Van Meerbeek B. Bonding Effectiveness of Luting Composites to Different CAD/CAM Materials. J Adhes Dent. 2016;18(4):289–302.
10. Egilmez F, Ergun G, Cekic-Nagas I, Vallittu PK, Lassila LV. Light Transmission of Novel CAD/CAM Materials and Their Influence on the Degree of Conversion of a Dual-curing Resin Cement. J Adhes Dent. 2017;19(1):39–48.
Published
2018-05-25
How to Cite
GRANDON, Fernando; WENDLER, Michael.
Contemporary adhesive cementation: the challenge of bonding to new CAD/CAM restorative materials..
Journal of Oral Research, [S.l.], v. 7, n. 5, p. 170-172, may 2018.
ISSN 0719-2479.
Available at: <https://www.joralres.com/index.php/JOralRes/article/view/joralres.2018.043>. Date accessed: 25 apr. 2024.
doi: https://doi.org/10.17126/joralres.2018.043.
Issue
Section
Perspectives
Keywords
Contemporary adhesive cementation; CAD/CAM; restorative materials.
This is an open-access article distributed under the terms of the Creative Commons Attribution License (CC BY 4.0). The use, distribution or reproduction in other forums is permitted, provided the original author(s) and the copyright owner(s) are credited and that the original publication in this journal is cited, in accordance with accepted academic practice. No use, distribution or reproduction is permitted which does not comply with these terms. © 2024.
