Accuracy of dental models fabricated by CAD/CAM milling method and 3D printing method.
Abstract
The purpose of this study was to evaluate the accuracy of a dental model fabricated using the CAD/CAM milling method and the 3D printing method. Materials and Method: This study was conducted in sequence of the digitization of the master model using an intraoral scanner, the manufacturing of working models (milling model, Multi-jet printing model and Color-jet printing model) by using the scan data of the master model, the digitization of the working model by using a laboratory scanner, the superimposition of the digital data of the master model and working models using inspection software, and 3-dimensional analysis. Ten measurements per group were done by one practitioner. One-way ANOVA and Tukey’s post-hoc test were performed to compare the difference between the three groups. Results: The overall difference in models caused by the manufacturing method was measured as 73.05μm±9.64μm, 84.52μm±4.78μm, and 96.05μm±5.43μm in the milling group, Multi-jet printing group and Color-jet printing group, respectively. The difference according to the shape of the teeth, the abutment teeth among the three parts was recorded with the lowest values as 19.18±2.08μm, 77.10±7.48μm, and 56.63±4.58μm. Conclusions: Dental models manufactured by the CAD/CAM milling method presented superior accuracy over the models manufactured by the 3D printing method. Therefore, the use of optimized CAD software and appropriate materials is crucial for the fabrication accuracy of dental models.
References
2. de Paula Silveira AC, Chaves SB, Hilgert LA, Ribeiro AP. Marginal and internal fit of CAD-CAM-fabricated composite resin and ceramic crowns scanned by 2 intraoral cameras. J Prosthet Dent. 2017;117(3):386–92.
3. Vecsei B, Joós-Kovács G, Borbély J, Hermann P. Comparison of the accuracy of direct and indirect three-dimensional digitizing processes for CAD/CAM systems - An in vitro study. J Prosthodont Res. 2017;61(2):177–84.
4. Taneva E, Kusnoto B, Evans CA. 3D Scanning, Imaging, and Printing in Orthodontics. 3th Ed. London, United Kingdom: INTECH; 2015.
5. Kim SY, Shin YS, Jung HD, Hwang CJ, Baik HS, Cha JY. Precision and trueness of dental models manufactured with different 3-dimensional printing techniques. Am J Orthod Dentofacial Orthop. 2018;153(1):144–53.
6. Wong KY, Esguerra RJ, Chia VAP, Tan YH, Tan KBC. Three-Dimensional Accuracy of Digital Static Interocclusal Registration by Three Intraoral Scanner Systems. J Prosthodont. 2018;27(2):120–8.
7. Lee B, Oh KC, Haam D, Lee JH, Moon HS. Evaluation of the fit of zirconia copings fabricated by direct and indirect digital impression procedures. J Prosthet Dent. 2018;S0022-3913(17):30555–3.
8. van Noort R. The future of dental devices is digital. Dent Mater. 2012;28(1):3–12.
9. Torabi K, Farjood E, Hamedani S. Rapid prototyping technologies and their applications in prosthodontics, a review of literature. J Dent. 2015;16(1):1.
10. Yau HT, Yang TJ, Lin YK. Comparison of 3-D Printing and 5-axis Milling for the Production of Dental e-models from Intra-oral Scanning. Computer-Aided Design and Applications. 2016;13(1):32–8.
11. Andriessen FS, Rijkens DR, van der Meer WJ, Wismeijer DW. Applicability and accuracy of an intraoral scanner for scanning multiple implants in edentulous mandibles: a pilot study. J Prosthet Dent. 2014;111(3):186–94.
12. Bankoğlu Güngör M, Doğan A, Turhan Bal B, Karakoca Nemli S. Evaluation of marginal and internal adaptations of posterior all-ceramic crowns fabricated with chair-side CAD/CAM system: an in vitro study. Acta Odontol Turc. 2018;35(1):1–8.
13. Li H, Lyu P, Wang Y, Sun Y. Influence of object translucency on the scanning accuracy of a powder-free intraoral scanner: A laboratory study. J Prosthet Dent. 2017;117(1):93–101.
14. Kim JE, Amelya A, Shin Y, Shim JS. Accuracy of intraoral digital impressions using an artificial landmark. J Prosthet Dent. 2017;117(6):755–761.
15. Patzelt SB, Bishti S, Stampf S, Att W. Accuracy of computer-aided design/computer-aided manufacturing-generated dental casts based on intraoral scanner data. J Am Dent Assoc. 2014;145(11):1133–40.
16. Bohner LOL, De Luca Canto G, Marció BS, Laganá DC, Sesma N, Tortamano Neto P. Computer-aided analysis of digital dental impressions obtained from intraoral and extraoral scanners. J Prosthet Dent. 2017;118(5):617–23.
17. Babiker GH, Khalifa N, Alhajj MN. Dimensional Accuracy of Alginate Impressions Using Different Methods of Disinfection With Varying Concentrations. Compend Contin Educ Dent. 2018;39(1):e17–20.
18. Gupta S, Narayan AI, Balakrishnan D. In Vitro Comparative Evaluation of Different Types of Impression Trays and Impression Materials on the Accuracy of Open Tray Implant Impressions: A Pilot Study. Int J Dent. 2017;2017:6306530.
19. Zitzmann NU, Kovaltschuk I, Lenherr P, Dedem P, Joda T. Dental Students' Perceptions of Digital and Conventional Impression Techniques: A Randomized Controlled Trial. J Dent Educ. 2017;81(10):1227–32.
20. Camardella LT, Breuning H, de Vasconcellos Vilella O. Accuracy and reproducibility of measurements on plaster models and digital models created using an intraoral scanner. J Orofac Orthop. 2017;78(3):211–20.
21. Nagarkar SR, Perdigão J, Seong WJ, Theis-Mahon N. Digital versus conventional impressions for full-coverage restorations: A systematic review and meta-analysis. J Am Dent Assoc. 2018;149(2):139–47.e1.
22. Pastoret MH, Krastl G, Bühler J, Weiger R, Zitzmann NU. Accuracy of a separating foil impression using a novel polyolefin foil compared to a custom tray and a stock tray technique. J Adv Prosthodont. 2017;9(4):287–93.
23. Kulkarni PR, Kulkarni RS, Shah RJ, Chhajlani R, Saklecha B, Maru K. A Comparative Evaluation of Accuracy of the Dies Affected by Tray Type, Material Viscosity, and Pouring Sequence of Dual and Single Arch Impressions- An In vitro Study. J Clin Diagn Res. 2017;11(4):ZC128–35.
24. Moldovan O, Luthardt RG, Corcodel N, Rudolph H. Three-dimensional fit of CAD/CAM-made zirconia copings. Dent Mater. 2011;27(12):1273–8.
Keywords
This is an open-access article distributed under the terms of the Creative Commons Attribution License (CC BY 4.0). The use, distribution or reproduction in other forums is permitted, provided the original author(s) and the copyright owner(s) are credited and that the original publication in this journal is cited, in accordance with accepted academic practice. No use, distribution or reproduction is permitted which does not comply with these terms. © 2024.
