3D printed titanium implants: colossal FDA-approved leap towards “personalized” maxillo-facial surgery.
References
1. Bickler S, Ozgediz D, Gosselin R, Weiser T, Spiegel D, Hsia R, Dunbar P, McQueen K, Jamison D. Key concepts for estimating the burden of surgical conditions and the unmet need for surgical care. World J Surg. 2010;34(3):374–80.
2. World Health Organization. The world health report 2008 : primary health care now more than ever. World Health Organization: Geneva, Switzerland; 2008.
3. Stewart B, Khanduri P, McCord C, Ohene-Yeboah M, Uranues S, Vega Rivera F, Mock C. Global disease burden of conditions requiring emergency surgery. Br J Surg. 2014;101(1):e9–22.
4. Garfin SR, Andersson G, Gronblad M, Rydevik B. The Bone and Joint Decade, 2000-2010, for Prevention and Treatment of Musculoskeletal Disorders. Spine. 1999;24(11):1055–7.
5. Tabrizi R, Pakshir H, Nasehi B. Does the Type of Maxillomandibular Deformity Influence Complication Rate in Orthognathic Surgery? J Craniofac Surg. 2015;26(7):e643–7.
6. Swennen GR, Mollemans W, Schutyser F. Three-dimensional treatment planning of orthognathic surgery in the era of virtual imaging. J Oral Maxillofac Surg. 2009;67(10):2080–92.
7. Lin HH, Lo LJ. Three-dimensional computer-assisted surgical simulation and intraoperative navigation in orthognathic surgery: a literature review. J Formos Med Assoc. 2015;114(4):300–7.
8. Lane WA. Some Remarks on the Treatment of Fractures. Br Med J. 1895;1(1790):861–3.
9. Ramos A, Mesnard M. Christensen vs Biomet Microfixation alloplastic TMJ implant: Are there improvements? A numerical study. J Craniomaxillofac Surg. 2015;43(8):1398–403.
10. Ackland DC, Robinson D, Redhead M, Lee PV, Moskaljuk A, Dimitroulis G. A personalized 3D-printed prosthetic joint replacement for the human temporomandibular joint: From implant design to implantation. J Mech Behav Biomed Mater. 2017;69:404–11.
2. World Health Organization. The world health report 2008 : primary health care now more than ever. World Health Organization: Geneva, Switzerland; 2008.
3. Stewart B, Khanduri P, McCord C, Ohene-Yeboah M, Uranues S, Vega Rivera F, Mock C. Global disease burden of conditions requiring emergency surgery. Br J Surg. 2014;101(1):e9–22.
4. Garfin SR, Andersson G, Gronblad M, Rydevik B. The Bone and Joint Decade, 2000-2010, for Prevention and Treatment of Musculoskeletal Disorders. Spine. 1999;24(11):1055–7.
5. Tabrizi R, Pakshir H, Nasehi B. Does the Type of Maxillomandibular Deformity Influence Complication Rate in Orthognathic Surgery? J Craniofac Surg. 2015;26(7):e643–7.
6. Swennen GR, Mollemans W, Schutyser F. Three-dimensional treatment planning of orthognathic surgery in the era of virtual imaging. J Oral Maxillofac Surg. 2009;67(10):2080–92.
7. Lin HH, Lo LJ. Three-dimensional computer-assisted surgical simulation and intraoperative navigation in orthognathic surgery: a literature review. J Formos Med Assoc. 2015;114(4):300–7.
8. Lane WA. Some Remarks on the Treatment of Fractures. Br Med J. 1895;1(1790):861–3.
9. Ramos A, Mesnard M. Christensen vs Biomet Microfixation alloplastic TMJ implant: Are there improvements? A numerical study. J Craniomaxillofac Surg. 2015;43(8):1398–403.
10. Ackland DC, Robinson D, Redhead M, Lee PV, Moskaljuk A, Dimitroulis G. A personalized 3D-printed prosthetic joint replacement for the human temporomandibular joint: From implant design to implantation. J Mech Behav Biomed Mater. 2017;69:404–11.
Published
2017-11-30
How to Cite
HAIDAR, Ziyad S.
3D printed titanium implants: colossal FDA-approved leap towards “personalized” maxillo-facial surgery..
Journal of Oral Research, [S.l.], v. 6, n. 11, p. 282-284, nov. 2017.
ISSN 0719-2479.
Available at: <https://www.joralres.com/index.php/JOralRes/article/view/joralres.2017.075>. Date accessed: 19 apr. 2024.
doi: https://doi.org/10.17126/joralres.2017.075.
Issue
Section
Perspectives
This is an open-access article distributed under the terms of the Creative Commons Attribution License (CC BY 4.0). The use, distribution or reproduction in other forums is permitted, provided the original author(s) and the copyright owner(s) are credited and that the original publication in this journal is cited, in accordance with accepted academic practice. No use, distribution or reproduction is permitted which does not comply with these terms. © 2024.
