Effect of the manual manipulation of composite resin with latex gloves.

  • Romina Ñaupari-Villasante School of Stomatology, Universidad Peruana Cayetano Heredia, Lima, Peru.
  • Johanna Cuadros-Sanchez School of Stomatology, Universidad Peruana Cayetano Heredia, Lima, Peru.
  • Lidia Yileng Tay School of Stomatology, Universidad Peruana Cayetano Heredia, Lima, Peru.

Abstract

Purpose: This in vitro study aimed to evaluate the influence of the manual manipulation of two composite resins: Filtek™ Z350XT (3M ESPE) and Herculite Précis® (Kerr), with latex gloves contaminated with powder, human saliva and alcohol, on the microhardness values. Material and Methods: Manual manipulation was evaluated using latex gloves with powder, latex gloves without powder, latex gloves without powder with saliva, latex gloves without powder with alcohol, and without hand manipulation or contaminants (control). Each resin was manually manipulated for 10 seconds and photoactivated for 20 seconds with a light intensity of 1000mW/cm2 using a VALO –Ultradent LED light– cured unit, and then each sample was evaluated on the microhardness Vickers tester Leitz (Wetzlar). The collected data were analyzed using Kruskal –Wallis and Mann – Whitney post-test (p<0.05). Results. Microhardness values showed a significant difference between the evaluated and control groups, showing lower microhardness values in the group of latex glove with powder for Filtek™ Z350XT and the group of latex glove without powder with saliva for Herculite Précis®. Conclusion. The manual manipulation of composite resins decreases their surface microhardness.

References

1. Fortkamp S. Influência da manipulação digital com luvas na resistência à compressão e tenacidade à fratura de resinas compostas [Tesis]. Florianópolis: Universidade Federal de Santa Catarina, Programa de Pós-Graduação em Odontologia; 2007.
2. Eiriksson SO, Pereira PNR, Swift EJ, Heymann HO, Sigurdsson A. Effects of saliva contamination on resin resin bond strength. Dent Mater 2004;20(1):37-44.
3. Kiremitci A, Yalçin F, Gökalp S. Bonding to enamel and dentin using self-etching adhesive systems. Quintessence Int 2004;35(5):367-70.
4. Martins NM, Schmitt GU, Oliveira HL, Madruga MM, Moraes RR, Censi MS. Contamination of composite resin by glove powder and saliva contaminants: Impact on mechanical properties and incremental layer debonding. Oper Dent 2015;40(3):1-6.
5. Oskoee SS, Navimipour EJ, Bahari M, Ajami AA, Oskoee PA, Abbasi NM. Effect of composite resin contamination with powdered and unpowdered latex gloves on its shear bond strength to bovine dentin. Oper Dent 2012;37(5):492-500.
6. Espinosa R, Valencia R, Ramirez A, Rangel EE. Efecto en la adhesión al esmalte por contaminación por humedad y saliva; estudio al MEB-EC. Rev Operatoria Dent Biomateriales 2015;6(2):39-43.
7. Heck MAP. Influência da contaminação pela manipulação durante o procedimento restaurador sobre as propriedades mecânicas de duas resinas compostas fotopolimerizáveis [Tesis]. Florianópolis: Universidade Federal de Santa Catarina, Programa de Pós-graduação em Odontologia; 2006.
8. Causton BE, Burke FJ, Wilson NH. Implications of the presence of dithiocarbamate in latex gloves. Dent Mater 1993;9(3):209-13.
9. Kimoto K, Tanaka K, Toyoda M, Ochiai KT Indirect latex glove contamination and its inhibitory effect on vinyl polysiloxane polymerization. J Prosthet Dent 2005; 93(5):433-8.
10. Brown RH, Taenkhum K, Buckley TJ, Hamilton RG. Different latex aeroallegen size distributions between powdered surgical and examination gloves: Significance for environmental avoidance. J Allergy Clin Immunol 2004;114(2):358-63.
11. Han J, Zhang H, Choe HS, Lin H, Zheng G, Hong G. Abrasive wear and surface roughness of contemporary dental composite resin. Dent Mater J 2014;33(6):725–32.
12. Alawjali SS, Lui JL. Effect of one-step polishing system on the color stability of nanocomposites. J Dent 2013;41(3):53-61.
13. Cobanoglu N, Unlu N, Onzer FF, Blatz MB. Bond strength of self-etch adhesives after saliva contamination at different application steps. Oper Dent 2013;38(5): 505-11.
14. Yadav RD, Raisingani D, Jindal D, Mathur R. A comparative analysis of different finishing and polishing devices on nanofilled, microfilled, and hybrid composite: A scanning electron microscopy and profilometric study. Int J Clin Pediatr Dent 2016;9(3):201-8.
15. Son SA, Park JK, Jung KH, Ko CC, Jeong CM, Kwon YH. Effect of 457nm diode-pumped solid state laser on the polymerization composite resins: microhardness, cross-link density, and polymerization shrinkage. Photomed Laser Surg 2015;33(1):3-8.
16. Botto I, Aizencop D, Bader M. Resistencia compresiva y dureza superficial de un sistema de resina compuesta monoincremental v/s uno convencional. Biomater Revista de la Sociedad Científica Grupo Chileno de Materiales Dentales 2014;1(2):13-31.
17. Roulet JF, Geraldeli S, Sensi L, Ozcan M. Relation between handing charaacteristics and application time of four photo-polymerized resin composites. Chin J Dent Res 2013;16(1):55-61.
18. De Oliveira AL, Giro EM, Garcia PP, Campos JÁ, Phark JH, Duarte S Jr. Roughness and morphology of composites: Influence of type of material, fluoride solution, and time. Microsc Microanal 2014;20(5): 1365–72.
19. Ferracane JL. Hygroscopic and hydrolytic effects in dental polymer networks. Dent Mater 2006;22(3):211-22.
Published
2019-10-30
How to Cite
ÑAUPARI-VILLASANTE, Romina; CUADROS-SANCHEZ, Johanna; YILENG TAY, Lidia. Effect of the manual manipulation of composite resin with latex gloves.. Journal of Oral Research, [S.l.], v. 8, n. 4, p. 310-315, oct. 2019. ISSN 0719-2479. Available at: <http://www.joralres.com/index.php/JOR/article/view/902>. Date accessed: 11 dec. 2019. doi: https://doi.org/10.17126/10.17126/joralres..
Section
Articles